L.A.B. Golf Terminology Glossary



L.A.B. (Lie Angle Balance)

The core technology behind every L.A.B. Golf putter. Lie Angle Balance is a physics equation that keeps the putter face square to the arc of the putting stroke.

Lie Angle Balance exists in two forms:

• Dynamic — Lie Angle Balance as it performs in motion, through the actual putting stroke.

• Static — Lie Angle Balance as it exists on paper, as the specification pack (length, lie angle) built for an individual player’s posture.


Zero Perceived Torque

What L.A.B. Golf makes and how lie angle balance is represented to a player. This is the brand's own term for the felt, functional result of the Lie Angle Balance process, a putter that behaves in the golfer's hands, as if it carries no torque.

Thoughts on Perceived Weight

• The zero-perceived-torque experience can create an impression of lighter static or swing weight even though neither has changed. That's because torque isn't something golfers feel at address; it's felt dynamically, as the putter is in motion during the stroke. When that rotational feedback is removed, the club can feel lighter overall, even though its actual static weight and swing weight remain the same.


Zero Torque

The broader industry concept and category that L.A.B. Golf's putters are grouped into. Zero Torque describes any putter engineered to minimize head rotation during the stroke it's the umbrella term used across the golf industry, while Lie Angle Balance is L.A.B.'s specific, patented approach to achieving that result.


Torque

The rotational force that causes a putter head to twist around its axis during the stroke a product of the force applied and the distance from the axis of rotation to the point where that force is applied. In a traditional putter, this is why the toe wants to pass the heel (or vice versa), forcing the golfer to make micro-compensations to return the face square at impact.


Measuring Torque

Torque is measured by observing how much a putter head wants to rotate when it's allowed to swing freely, unconstrained by a golfer's grip. L.A.B. Golf's Revealer device is built for exactly this: it lets a putter hang and swing on its own, so the natural twisting tendency of the head becomes visible and quantifiable, rather than staying hidden in the golfer's hands.

From there, torque is dialed in not just observed through the balancing process itself:

• Speed of Rotation determines the rate at which a head closes or opens as it swings and is used to check the putter against proper tolerance during balancing.

• Dynamic Weighting & Static Shafting are the physical levers used to bring that rotation down to the target tolerance for a given head shape and hosel configuration.

In short: measuring torque isn't a single number it's an ongoing feedback loop between how a head wants to rotate (speed of rotation), how its mass is distributed (dynamic weighting), and how the shaft is set into it (static shafting), repeated until the head sits within tolerance for true Lie Angle Balance.


Performance Torque

An extension of the Lie Angle Balance philosophy that shifts the goal from eliminating torque to calibrating it. Rather than balancing a head to sit at zero rotational tendency, Performance Torque engineers a deliberate, controlled amount of torque into the head that is tuned to work with a specific player's natural stroke arc rather than neutralizing it entirely. Where Zero Perceived Torque is designed to make the putter feel like it carries no torque at all, Performance Torque is designed to make the right amount of torque feel like an extension of the player's own stroke.

The distinction matters most for players whose stroke already has a natural arc (opening on the backstroke, closing through impact) rather than a straight-back-straight-through path. For a zerotorque putter, that natural arc has nothing to work with and the head resists rotating regardless of what the stroke is doing. Performance Torque proposes tuning the head's rotational tendency to match the player's own arc, so the face returns square through cooperation with the stroke rather than resistance to it.


Speed of Rotation

How the rate of closure is determined and measured during the balancing process. This is the working metric L.A.B. Golf uses while building a putter and checking how quickly a head wants to rotate open or closed as it's swung and adjusting until it falls within proper tolerance for Lie Angle Balance.


Dynamic Weighting & Static Shafting

L.A.B. Golf's method for achieving Lie Angle Balance. Rather than relying on a fixed formula, this is a hands-on process where weight is placed and adjusted around the head (dynamic weighting) in combination with a fixed, deliberate shaft placement (static shafting) to bring a given head to true Lie Angle Balance.


MOI (Moment of Inertia)

A measure of a putter head's resistance to twisting. Increased weight distribution to the perimeter of a given head shape increases stability this holds especially true for center-shafted putters.

Heel-shafted putters naturally counteract that stability. However, L.A.B.'s hand-balancing process gives dynamic influence over stability even in heel-shafted designs, allowing the balancing process to compensate for, where head shape and shaft position would otherwise work against each other.


The Revealer

A device built to let a putter hang and swing freely, independent of a golfer's grip, so its natural rotational tendencies can be observed directly. It's used both to diagnose how much a given putter wants to twist and to inform the design of putters that resist that twist entirely.


Forward Press

A setup and impact position built into L.A.B.'s putters and Press Grips. It means leaning the shaft forward at impact to reduce loft, while striking the ball with an upward path to encourage the truest possible roll with the least amount of skidding.


Press Grip

L.A.B. Golf’s proprietary grip line, built with Forward Press Technology. Works with any putter, with best performance when paired with an L.A.B. Golf putter head.


Toe Hang

A putter whose toe droops downward when balanced on your finger or a fulcrum. This indicates the putter’s center of gravity is closer to the toe, creating a “hang” effect. “Toe flow” helps square the face at impact like a door opening and closing. In the LAB Revealer, a toe-hang putter closes and opens in transition. It’s not truly “toe flowing” it’s torquing. The golfer must actively manipulate the face to square it.


Face Balance

A putter whose face points straight up (parallel to the sky) when balanced on your finger or a fulcrum, suggesting the center of gravity is near the shaft axis. The putter head remains stable because the face points upward at address. These putters want to stay open and continue opening in transition.


Armlock

A putting style where the grip rests against the lead forearm, eliminating wrist movement that can cause a push or pull. Paired with Lie Angle Balance, it delivers a double benefit removing the wrists from the stroke and removing torque from the head at the same time.


Sweeper (Long Putter)

A style of putting with a long putter on a more upright, linear plane for consistency. Unrelated to anchoring, which remains against the rules. L.A.B. is one of the few makers building long putters with full-custom Lie Angle Balance options.


Counterbalance

A style of putting that features a heavier clubhead paired with extra weight added to the top of a longer grip. This design shifts the balance point closer to your hands, which helps quiet your wrists and small muscles, improves tempo, and promotes a more stable, pendulum-style putting stroke.


Remote Fitting

L.A.B.'s online fitting process: the golfer records a video of their stroke and measures their current ("gamer") putter's length. A certified L.A.B. fitter uses that to calculate the ideal length and lie angle for a new putter.


Lie Angle Balancing (Process)

L.A.B.'s proprietary manufacturing process, built around Dynamic Weighting & Static Shafting, that builds each putter to order so it is balanced specifically to the individual golfer's stroke and specs.


Coefficient of Thermal Expansion

The (CTE) measures how much a material expands or contracts with temperature shifts, which directly affects a golf club's structural integrity when exposed to seasonal weather or left in a car trunk. Because golf clubs blend components with wildly different CTE values, rapid temperature swings create structural stress, particularly at the connection points.


Hosel Riser System

The engineering challenge was significant. With center-shafted putters, aligning the shaft axis with the center of gravity is relatively simple. But in a heel-shafted model, lie angle changes shift the shaft axis off-center. L.A.B. engineers solved this with a proprietary aluminum riser hosel system. Depending on the lie angle, the riser changes height to keep the shaft axis perfectly aligned with the putter’s center of gravity. The result? No matter the lie angle (65° to 74°), balance is preserved.


Destructive Testing

A critical engineering process used by manufacturers to determine the absolute failure limits of materials, bonds, and structural designs. Unlike non-destructive testing (NDT), which checks for invisible internal flaws using methods like ultrasonic testing, destructive testing deliberately pushes components until they break, crack, or permanently deform. This data ensures that clubs can withstand years of violent, high-velocity impacts on the course without failing catastrophically in a player's hands.


Aluminum

L.A.B. Golf putters are primarily made from CNC-milled 6061 aluminum for the main body, paired with internal and external weights made of steel or tungsten, and optional metal/stainless steel face inserts on select models.


Stainless Steel

L.A.B. Golf offers two categories of stainless-steel putters: full 303 Stainless Steel solid-body blade putters, and mallet putters equipped with a 303 Stainless Steel face insert.


Anodizing

An electrochemical process that converts a metal surface into a decorative, durable, and corrosion-resistant anodic oxide finish. Unlike paint or plating, which are applied to the surface, this oxide layer is fully integrated with the underlying metal substrate so it cannot chip or peel.